v6 "Los Angeles" Quadrotor

CIMG4394

Features

  • 499mm (19.6'') wingspan
  • 430g (15.2oz) all up weight
  • Glass/epoxy FR4 and aluminum frame
  • Battery: Lipo 3S 1320mAh
  • Control board v4c
  • Motor Controllers: Castle Creations Phoenix10

Read more...

v5 "Basic" Quadrotor

CIMG0385

Features

  • 674mm (26.5'') winspan
  • 553g (19.5oz) all up weight
  • Glass/epoxy FR4 and aluminum frame
  • Carbon landing gear
  • Battery: Lipo 3S 1350mAh
  • Brushed Motors + Gearboxes

Read more...

v4 Quadrotor

Features

  • 652mm (25.7'') wingspan
  • 530g (18.7oz) all up weight
  • Glass/epoxy FR4 and aluminum frame
  • Carbon landing gear
  • Battery: Lipo 3S 1350mAh
  • Control board v3
  • Brushed Motors + Gearboxes

IMGP3376

Read more...

v3 Quadrotor

Features

  • 652mm (25.7'') wingspan
  • 589g (20.8oz) all up weight
  • Glass/epoxy FR4 and aluminum square tubes frame
  • Battery: Lipo 3S 1350mAh
  • Control board v2
  • Brushed motors + Gearboxes

IMGP2970

Read more...

v2 Quadrotor

Features

  • 744mm (29.3'') wingspan
  • Glass/epoxy FR4 and carbon tubes frame
  • Battery: Lipo 3S 1350mAh
  • Control board v2
  • Brushed Motors + Gearboxes

IMGP2886

Read more...

v1 Quadrotor

Features

  • 780mm (30.7'') wingspan
  • Glass/epoxy FR4 and carbon tube frame
  • Battery: Lipo 3S 1350mAh
  • Control board v1
  • Brushed Motors + Gearboxes

IMGP2652

Read more...

Control Board v4

v4a Features

  • dsPIC30F5011 DSC Microchip

  • ADXRS300 Gyroscope Analog Devices (x3)

  • RC Receiver direct servo connections

  • UART serial link (up & downlink)

  • Four PWM brushed motor driver

  • F69mm (F2.7'') PCB double sided printed circuit board (olimex.com)

CIMG0037

Read more...

Control Board v3

Features

  • PIC16F876 MCU Microchip (x3)

  • ENC03J Gyroscope Murata (x3)

  • embedded RC receiver

  • Four PWM brushed motor driver

  • F90mm (F3.5'')

IMGP3339

Read more...

Control Board v2

Features

  • PIC16F876 MCU Microchip (x3)
  • ENC03J Gyroscope Murata (x3)
  • embedded RC receiver
  • Four PWM brushed motor driver
  • F100mm (F3.9'')

IMGP2979 IMGP2888

Control Board v1

Features

  • PIC16F876 MCU Microchip (x3)

  • ENC03J Gyroscope Murata (x3)

  • one wire PPM RC receiver interface

  • Four PWM brushed motor driver

  • 92.5 x 92.5mm (3.8'' x 3.8'') single sided PCB

     

Control Board v1 on Quadrotor v1 Control board v1